877-963-4966

D-Series Pneumatic Automatic Standard Hose Barb Coupler

D-Series Pneumatic Automatic Standard Hose Barb Coupler

×
Part Number 2DS2.5-B
Material Brass
Hose ID 1/4"
Body Size 5/16"
Pressure Rating See Product Details
Temperature Range -40°F to +250°F (-40°C to +121°C)
Optional Pkg/Box Qty 10
Weight Lb 0.2700

Specifications

  • Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst
  • Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst

Construction

  • Machined components are manufactured using solid bar stock
  • Stainless Steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
  • Nitrile (Buna-N) seals are standard
  • Steel componentry is plated using ROHS Compliant Trivalent Chrome.
  • Steel tubular valve

Compatibility & Interchange Data

  • Foster 3, 4, 5 and 6 Series
  • Parker 30- Series Automatic Interchange
  • Hansen 3000, 4000, 5000 and 6000

How it works

  • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
  • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
  • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
  • After the line is fully exhausted, you are able to safely separate the nipple from the coupler.

Safety notes

  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
  • Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
  • Dixon® cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.

×

Related Products

×
×
×
×
×

Stock Availability