- Temporary/emergency pipe repair on leaking or damaged pipes
- Wrap tightly around leaking/damaged pipe. For best results, the completed bandage application should be no less than 10mm thick (12-15 wraps). Difficult or large applications may require multiple bandages.
- Both Rapp-it Bandage and Rapp-it Steel Putty are compliant with Australian Standard (AS/NZS 4020:2005).
- Rapp-it Steel Putty is compliant with the equivalent US Standard, NSF 61.
How it works
- Shut down pipes or hoses. Apply gloves, then thoroughly clean and roughen the damaged pipe area with a metal file or wire brush. A clean, rough surface helps result in a successful repair. Knead Steel Putty until it is a uniform grey color. Apply firmly to the damaged are within 2-5 minutes of mixing. Open foil pouch soak bandage in fresh water for 10 seconds. Squeeze Bandage 1-2 times while in water to help activation. It is important to apply the bandage before the putty is cured. Quickly wrap the bandage around the damaged area, extending 50mm either side of the leak. Pull each layer tightly and firmly throughout application, using your hand to mold and squeeze the layers together in a tightening motion. Continue to squeeze the bandage with a rotating motion until resin stops foaming and is set. Allow a minim of 30 minutes for Rapp-it Bandage to set rock hard.